CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Realisable k-epsilon model

Realisable k-epsilon model

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(Added section "References", pointing to the section of the same name on the parent page)
 
(5 intermediate revisions not shown)
Line 1: Line 1:
 +
{{Turbulence modeling}}
== Transport Equations ==
== Transport Equations ==
Line 23: Line 24:
where <math> \overline{\Omega_{ij}} </math>  is the mean rate-of-rotation tensor viewed in a rotating reference frame with the angular velocity <math> \omega_k  </math>. The model constants  <math> A_0  </math> and <math> A_s  </math> are given by: <br>
where <math> \overline{\Omega_{ij}} </math>  is the mean rate-of-rotation tensor viewed in a rotating reference frame with the angular velocity <math> \omega_k  </math>. The model constants  <math> A_0  </math> and <math> A_s  </math> are given by: <br>
-
<math> A_0 = 4.04, \; \;  A_s = \sqrt{6}  \cos \phi </math>
+
<math> A_0 = 4.04, \; \;  A_s = \sqrt{6}  \cos \phi </math> <br>
 +
 
 +
<math>  \phi = \frac{1}{3} \cos^{-1} (\sqrt{6} W), \; \;    W = \frac{S_{ij} S_{jk} S_{ki}}{{\tilde{S}} ^3}, \; \; \tilde{S} = \sqrt{S_{ij} S_{ij}}, \; \; S_{ij} = \frac{1}{2}\left(\frac{\partial u_j}{\partial x_i}  + \frac{\partial u_i}{\partial x_j} \right)  </math>
 +
 
 +
 
 +
==Model Constants ==
 +
 
 +
<math> C_{1 \epsilon} = 1.44,  \;\; C_2 = 1.9, \;\; \sigma_k = 1.0, \;\; \sigma_{\epsilon} = 1.2  </math>
 +
 
 +
 
 +
== References ==
 +
 
 +
See section [[K-epsilon_models#References|References]] in the parent page [[K-epsilon models]].
 +
 
 +
[[Category:Turbulence models]]

Latest revision as of 19:57, 16 December 2014

Turbulence modeling
Turbulence
RANS-based turbulence models
  1. Linear eddy viscosity models
    1. Algebraic models
      1. Cebeci-Smith model
      2. Baldwin-Lomax model
      3. Johnson-King model
      4. A roughness-dependent model
    2. One equation models
      1. Prandtl's one-equation model
      2. Baldwin-Barth model
      3. Spalart-Allmaras model
    3. Two equation models
      1. k-epsilon models
        1. Standard k-epsilon model
        2. Realisable k-epsilon model
        3. RNG k-epsilon model
        4. Near-wall treatment
      2. k-omega models
        1. Wilcox's k-omega model
        2. Wilcox's modified k-omega model
        3. SST k-omega model
        4. Near-wall treatment
      3. Realisability issues
        1. Kato-Launder modification
        2. Durbin's realizability constraint
        3. Yap correction
        4. Realisability and Schwarz' inequality
  2. Nonlinear eddy viscosity models
    1. Explicit nonlinear constitutive relation
      1. Cubic k-epsilon
      2. EARSM
    2. v2-f models
      1. \overline{\upsilon^2}-f model
      2. \zeta-f model
  3. Reynolds stress model (RSM)
Large eddy simulation (LES)
  1. Smagorinsky-Lilly model
  2. Dynamic subgrid-scale model
  3. RNG-LES model
  4. Wall-adapting local eddy-viscosity (WALE) model
  5. Kinetic energy subgrid-scale model
  6. Near-wall treatment for LES models
Detached eddy simulation (DES)
Direct numerical simulation (DNS)
Turbulence near-wall modeling
Turbulence free-stream boundary conditions
  1. Turbulence intensity
  2. Turbulence length scale

Contents

Transport Equations

\frac{\partial}{\partial t} (\rho k) + \frac{\partial}{\partial x_j} (\rho k u_j) = \frac{\partial}{\partial x_j} \left [ \left(\mu + \frac{\mu_t}{\sigma_k}\right) \frac{\partial k} {\partial x_j} \right ] + P_k + P_b - \rho \epsilon - Y_M + S_k


\frac{\partial}{\partial t} (\rho \epsilon) + \frac{\partial}{\partial x_j} (\rho \epsilon u_j) = \frac{\partial}{\partial x_j} \left[ \left(\mu + \frac{\mu_t}{\sigma_{\epsilon}}\right) \frac{\partial \epsilon}{\partial x_j} \right ] + \rho \, C_1 S \epsilon - \rho \, C_2 \frac{{\epsilon}^2} {k + \sqrt{\nu \epsilon}} + C_{1 \epsilon}\frac{\epsilon}{k} C_{3 \epsilon} P_b + S_{\epsilon}

Where

C_1 = \max\left[0.43, \frac{\eta}{\eta + 5}\right] , \;\;\;\;\; \eta = S \frac{k}{\epsilon}, \;\;\;\;\; S =\sqrt{2 S_{ij} S_{ij}}

In these equations, P_k represents the generation of turbulence kinetic energy due to the mean velocity gradients, calculated in same manner as standard k-epsilon model. P_b is the generation of turbulence kinetic energy due to buoyancy, calculated in same way as standard k-epsilon model.

Modelling Turbulent Viscosity

\mu_t = \rho C_{\mu} \frac{k^2}{\epsilon}

where
C_{\mu} = \frac{1}{A_0 + A_s \frac{k U^*}{\epsilon}}
U^* \equiv \sqrt{S_{ij} S_{ij} + \tilde{\Omega}_{ij} \tilde{\Omega}_{ij}}  ;
\tilde{\Omega}_{ij} = \Omega_{ij} - 2 \epsilon_{ijk} \omega_k  ;
\Omega_{ij} = \overline{\Omega_{ij}} - \epsilon_{ijk} \omega_k

where \overline{\Omega_{ij}} is the mean rate-of-rotation tensor viewed in a rotating reference frame with the angular velocity \omega_k . The model constants A_0 and A_s are given by:
A_0 = 4.04, \; \; A_s = \sqrt{6} \cos \phi

\phi = \frac{1}{3} \cos^{-1} (\sqrt{6} W), \; \; W = \frac{S_{ij} S_{jk} S_{ki}}{{\tilde{S}} ^3}, \; \; \tilde{S} = \sqrt{S_{ij} S_{ij}}, \; \; S_{ij} = \frac{1}{2}\left(\frac{\partial u_j}{\partial x_i} + \frac{\partial u_i}{\partial x_j} \right)


Model Constants

C_{1 \epsilon} = 1.44, \;\; C_2 = 1.9, \;\; \sigma_k = 1.0, \;\; \sigma_{\epsilon} = 1.2


References

See section References in the parent page K-epsilon models.

Retrieved from "https://openfoam.cfd-online.com/Wiki/Realisable_k-epsilon_model"
My wiki