Generic scalar transport equation

From CFD-Wiki

(Difference between revisions)

Revision as of 21:55, 13 December 2005

A differential equation epxresses a certain conservation principle. Whether be it in electromagnetics, fluid dynamics, heat transfer, radiation, electronics... conservation principles are the basis for the derivation of differential or integro-differential equations. In this respect, any differential equation addresses a certain quantity as it dependent variable and thus expresses the balance between the phenomena affecting the evolution of this quanitity. For example, the temperature of a fluid in a heated pipe is affected by convection due to the solid-fluid interface, and due to the fluid-fluid interaction. Furthermore, temperature is also diffused inside the fluid. For a state state problem, with the absence of sources, a differential equation governing the temperature will definetely express a balance between convection and diffusion.
A brief inspection of the equations governing various physical phenomena will reveal that all of these equations can be put into a generic form thus allowing a systematic approach for a computer simulation.
For example, the conservation equation of a chemical species $c_i$ is
$\frac{\partial{\rho c_i}}{\partial t} + \nabla \cdot (\rho \vec u c_i + \vec J) = R_i$ where $\vec u$ denotes the velocity field, $\vec J$ denotes the diffusion flux the of the chemical species, and $R_i$ denotes the rate of generation of $R_i$ caused by the chemical reaction.
The x-momentum equation for a Newtonian fluid can be written as
$\frac{\partial{\rho u}}{\partial t} + \nabla \cdot (\rho \vec u u ) =\nabla \cdot (\mu \nabla u ) - \frac {\partial p}{\partial x} + B_x + V_x$
where $B_x$ is the body force in the x-direction and $V_x$ includes the viscous terms that are not expressed by $\nabla \cdot (\mu \nabla u )$

Generic scalar transport equation

From CFD-Wiki

Revision as of 21:55, 13 December 2005

Views

My wiki

wiki navigation

wiki search

wiki toolbox