TwinMesh
From CFD-Wiki
(Difference between revisions)
(→Mesh Types) |
(→Rotary Positive Displacement Machines) |
||
| (28 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
== TwinMesh == | == TwinMesh == | ||
| - | TwinMesh is a meshing software developed by CFX Berlin Software GmbH, Germany. It automatically generates hexahedral meshes for the continuously changing fluid volumes of the working chambers of rotary positive displacement machines. The product was released in 2014. | + | TwinMesh is a [[Meshing|meshing]] software developed by CFX Berlin Software GmbH, Germany. It automatically generates hexahedral meshes for the computational [[Fluid dynamics|fluid dynamics]] ([[Introduction to CFD|CFD]]) simulation of the continuously changing [[Fluid|fluid]] volumes of the working chambers of rotary positive displacement (PD) machines. The product was released in 2014. |
| - | The current product release is Version | + | TwinMesh supports floating licenses via LM-X license manager for 64-bit Windows and Linux systems. |
| + | |||
| + | The current product release is Version 2024, released in November 2023. | ||
=== Mesh Types === | === Mesh Types === | ||
| - | TwinMesh can generate [[Structured mesh generation|structured]] hexahedral meshes. | + | TwinMesh can generate [[Structured mesh generation|structured]] hexahedral meshes for the axial gaps and working chambers of rotary positive displacement machines.<br/> |
| + | Additionally, TwinMesh can generate [[Unstructured mesh generation|unstructured]] tetrahedral meshes for the axial gaps of rotary positive displacement machines. | ||
=== Meshing Techniques === | === Meshing Techniques === | ||
| - | TwinMesh's mesh generation employs the following meshing techniques and smoothing algorithms. | + | TwinMesh's [[Mesh generation|mesh generation]] employs the following meshing techniques and smoothing algorithms. |
* Option to fix the nodes along the rotors, which results in a general interface between the rotor meshes. | * Option to fix the nodes along the rotors, which results in a general interface between the rotor meshes. | ||
* Option to fix the nodes along the housing geometry to get an 1:1 interface between the rotor meshes. | * Option to fix the nodes along the housing geometry to get an 1:1 interface between the rotor meshes. | ||
* Option to fix the nodes on one of the rotors so that the nodes on the other rotor are able to move. This method also results in an 1:1 rotor interface. | * Option to fix the nodes on one of the rotors so that the nodes on the other rotor are able to move. This method also results in an 1:1 rotor interface. | ||
| + | * Option to mesh rotors with variable pitch. | ||
| + | * Manual adjustment of individual nodes. | ||
| + | * Node mapping at general grid interfaces. | ||
* Various smoothing algorithms to control mesh orthogonality and node equidistance in all three dimensions. | * Various smoothing algorithms to control mesh orthogonality and node equidistance in all three dimensions. | ||
| - | * Mesh quality check such as: determinant, min. angle, volume change, aspect ratio. | + | * Mesh quality check such as: determinant, min. angle, volume change, and aspect ratio. |
| + | |||
| + | * TwinMesh supports [[Parallel computing|parallel computing]] with the usage of up to 16 local cores for the meshing process. | ||
| + | |||
| + | === Additional Features === | ||
| + | |||
| + | * CHT-GGI interface that allows to create a fluid-fluid-solid interface. | ||
| + | * Non-reflecting boundary condition in CFX-Pre. | ||
| + | * Mesh interpolation feature that allows to vary the solver timestep and the rotational speed of the PD machine. | ||
| + | * Consideration of shaft deflection and thermal deformation. | ||
| + | * Support for variable pitch profiles | ||
| + | * Support for bending line and rotor deformation due to mechanical and thermal loads | ||
| + | * Mesh deformation approach for reed valves is included into User Fortran routines (CFX) and User Defined Functions (Fluent) to get a simple but stable and efficient simulation setup, allowing several reed valves with different properties in one simulation | ||
| + | |||
=== Geometry Support === | === Geometry Support === | ||
| Line 23: | Line 42: | ||
TwinMesh supports IGES (.iges) and point data (.csv). | TwinMesh supports IGES (.iges) and point data (.csv). | ||
| - | The following geometry modifications are available in TwinMesh | + | The following geometry modifications are available in TwinMesh: |
* Rotor scaling | * Rotor scaling | ||
* Rotor translation | * Rotor translation | ||
* Rotation angle offset | * Rotation angle offset | ||
| + | |||
| + | === Rotary Positive Displacement Machines === | ||
| + | |||
| + | TwinMesh allows meshing of the following rotary PD machines: | ||
| + | |||
| + | * Internal/external gear pump | ||
| + | * Gerotor pump | ||
| + | * Orbital motor | ||
| + | * Vane pump | ||
| + | * Lobe pump | ||
| + | * Roots blower | ||
| + | * Rotary piston pump | ||
| + | * Scroll compressor/expander | ||
| + | * Conical rotor pump | ||
| + | * Screw compressor/expander | ||
| + | * Eccentric screw pump/progressive cavity pump | ||
| + | * Wankel engine | ||
| + | * Single stage and multi stage vacuum pumps | ||
=== CFD Solver Interfaces === | === CFD Solver Interfaces === | ||
| - | TwinMesh has built-in support for [[Ansys FAQ|Ansys]] CFX. | + | TwinMesh has built-in support for [[Ansys FAQ#CFX|ANSYS CFX]] and [[Ansys Fluent]] and automatically generates ready-to-run templates for ANSYS CFX, Ansys Fluent and ANSYS CFD PrepPost. |
=== Supported Platforms === | === Supported Platforms === | ||
TwinMesh supports 64-bit Windows versions. | TwinMesh supports 64-bit Windows versions. | ||
| + | |||
| + | === Literature === | ||
| + | |||
| + | * Hesse, J., Spille-Kohoff, A., Hauser, J., & Schulze-Beckinghausen, P. (2014). Structured meshes and reliable CFD simulations: TwinMesh for positive displacement machines. In International screw compressor conference, TU Dortmund. | ||
| + | * Spille-Kohoff, A., Hesse, J., & El Shorbagy, A. (2015, August). CFD simulation of a screw compressor including leakage flows and rotor heating. In IOP Conference Series: Materials Science and Engineering (Vol. 90, No. 1, p. 012009). IOP Publishing. ([https://iopscience.iop.org/article/10.1088/1757-899X/90/1/012009/pdf]) | ||
| + | * Andres, R., Nikolov, A., & Brümmer, A. (2016). CFD Simulation of a Twin Screw Expander including Leakage Flows. In 23rd International Compressor Engineering Conference at Purdue, July 11-14, 2016. ([https://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=3496&context=icec]) | ||
| + | * Willie, J. (2017, September). Use of CFD to predict trapped gas excitation as source of vibration and noise in screw compressors. In IOP Conference Series: Materials Science and Engineering (Vol. 232, p. 012021). IOP Publishing. ([http://iopscience.iop.org/article/10.1088/1757-899X/232/1/012021/pdf]) | ||
| + | * Pietrzyk, P., Roth, D., Schmitz, K. & Jacobs, G. (2018). Design study of a high speed power unit for electro hydraulic actuators (EHA) in mobile applications. In 11th International Fluid Power Conference Aachen, March 19-21, 2018. ([http://publications.rwth-aachen.de/record/726047/files/726047.pdf]) | ||
| + | |||
| + | === External Links === | ||
| + | |||
| + | * [http://www.twinmesh.com TwinMesh's homepage] | ||
| + | * [http://www.cfx-berlin.de CFX Berlin's homepage] | ||
Latest revision as of 09:51, 29 November 2023
Contents |
TwinMesh
TwinMesh is a meshing software developed by CFX Berlin Software GmbH, Germany. It automatically generates hexahedral meshes for the computational fluid dynamics (CFD) simulation of the continuously changing fluid volumes of the working chambers of rotary positive displacement (PD) machines. The product was released in 2014.
TwinMesh supports floating licenses via LM-X license manager for 64-bit Windows and Linux systems.
The current product release is Version 2024, released in November 2023.
Mesh Types
TwinMesh can generate structured hexahedral meshes for the axial gaps and working chambers of rotary positive displacement machines.
Additionally, TwinMesh can generate unstructured tetrahedral meshes for the axial gaps of rotary positive displacement machines.
Meshing Techniques
TwinMesh's mesh generation employs the following meshing techniques and smoothing algorithms.
- Option to fix the nodes along the rotors, which results in a general interface between the rotor meshes.
- Option to fix the nodes along the housing geometry to get an 1:1 interface between the rotor meshes.
- Option to fix the nodes on one of the rotors so that the nodes on the other rotor are able to move. This method also results in an 1:1 rotor interface.
- Option to mesh rotors with variable pitch.
- Manual adjustment of individual nodes.
- Node mapping at general grid interfaces.
- Various smoothing algorithms to control mesh orthogonality and node equidistance in all three dimensions.
- Mesh quality check such as: determinant, min. angle, volume change, and aspect ratio.
- TwinMesh supports parallel computing with the usage of up to 16 local cores for the meshing process.
Additional Features
- CHT-GGI interface that allows to create a fluid-fluid-solid interface.
- Non-reflecting boundary condition in CFX-Pre.
- Mesh interpolation feature that allows to vary the solver timestep and the rotational speed of the PD machine.
- Consideration of shaft deflection and thermal deformation.
- Support for variable pitch profiles
- Support for bending line and rotor deformation due to mechanical and thermal loads
- Mesh deformation approach for reed valves is included into User Fortran routines (CFX) and User Defined Functions (Fluent) to get a simple but stable and efficient simulation setup, allowing several reed valves with different properties in one simulation
Geometry Support
TwinMesh supports IGES (.iges) and point data (.csv).
The following geometry modifications are available in TwinMesh:
- Rotor scaling
- Rotor translation
- Rotation angle offset
Rotary Positive Displacement Machines
TwinMesh allows meshing of the following rotary PD machines:
- Internal/external gear pump
- Gerotor pump
- Orbital motor
- Vane pump
- Lobe pump
- Roots blower
- Rotary piston pump
- Scroll compressor/expander
- Conical rotor pump
- Screw compressor/expander
- Eccentric screw pump/progressive cavity pump
- Wankel engine
- Single stage and multi stage vacuum pumps
CFD Solver Interfaces
TwinMesh has built-in support for ANSYS CFX and Ansys Fluent and automatically generates ready-to-run templates for ANSYS CFX, Ansys Fluent and ANSYS CFD PrepPost.
Supported Platforms
TwinMesh supports 64-bit Windows versions.
Literature
- Hesse, J., Spille-Kohoff, A., Hauser, J., & Schulze-Beckinghausen, P. (2014). Structured meshes and reliable CFD simulations: TwinMesh for positive displacement machines. In International screw compressor conference, TU Dortmund.
- Spille-Kohoff, A., Hesse, J., & El Shorbagy, A. (2015, August). CFD simulation of a screw compressor including leakage flows and rotor heating. In IOP Conference Series: Materials Science and Engineering (Vol. 90, No. 1, p. 012009). IOP Publishing. ([1])
- Andres, R., Nikolov, A., & Brümmer, A. (2016). CFD Simulation of a Twin Screw Expander including Leakage Flows. In 23rd International Compressor Engineering Conference at Purdue, July 11-14, 2016. ([2])
- Willie, J. (2017, September). Use of CFD to predict trapped gas excitation as source of vibration and noise in screw compressors. In IOP Conference Series: Materials Science and Engineering (Vol. 232, p. 012021). IOP Publishing. ([3])
- Pietrzyk, P., Roth, D., Schmitz, K. & Jacobs, G. (2018). Design study of a high speed power unit for electro hydraulic actuators (EHA) in mobile applications. In 11th International Fluid Power Conference Aachen, March 19-21, 2018. ([4])
External Links
* TwinMesh's homepage * CFX Berlin's homepage
